Typical Tasks: [c3voc]

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
<nowiki>### WORK IN PROGRESS ###</nowiki>

Because of the need of an independent "it-just-works" network, a seperate Flightcase with some Network Hardware is planned.

2x HP JC102A A5820X-24XG-SFP+ Switches for the Core {{hardware:4aa3-0739enw.pdf|Datasheet}}

9x HP JC100A A5800 24G Switches for Access {{hardware:c04111584.pdf|Datasheet}}

The Accessswitches are plannend do screw them in [[https://www.thomann.de/de/thon_multiflex_2he_modulrack_45.htm| Thomann 1HE Boxes]] the Core Switches in an [[https://www.thomann.de/de/thon_multiflex_3u_modulrack_45.htm|3HE Box]] together with some cabling stuff.

For the Switches are some well-documented Templates planned, so that nobody needs to configure it by hand.

The Config for the CORE Switches:
The Config for the ACCESS Switches:

All Switches run on Comware 5, the documentation for the OS is here: {{hardware:comware_5_cli_guide.pdf}}

====== Typical Tasks: ======


add a user:
<code>
on switch side:
system-view
local-user waschtl
password simple 12345678

on your pc:
scp -c aes128-cbc ~/.ssh/id_rsa_1024 waschtl@$switch:/waschtl.key

on switch side:
ssh user waschtl service-type all authentication-type any assign publickey waschtl work-directory flash:/
</code>



add a VLAN and allow it on some Interfaces:
<code>
system-view
vlan 1337
interface Bridge-Aggregation14
port link-type trunk
port trunk permit vlan 1 3504

interface GigabitEthernet1/0/27
port link-mode bridge
port access vlan 3504
</code>

Also planned for the Flightcase (Feature Release):
* some long power Cords
* long RJ45 Cables
* bags with transceivers
* some fibers
* fiber cleaner
* serial cable