Differences

This shows you the differences between two versions of the page.

--- projects:tallycom [2020/12/11 01:03] – ToDo checked: voctolight: reconnect automatically when voctocore is restared eric
+++ projects:tallycom [2026/07/26 22:17] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
-= tallycom
+# tallycom
 ---- dataentry project ----
@@ Line 12: / Line 12: @@
-== TODOs
+## TODOs
-* <todo #eric:2020-12-11>voctolight: reconnect automatically when voctocore is restared</todo>
+* <todo>voctolight: reconnect automatically when voctocore is restared</todo>
 * find PTT buttons to be mounted on the tripod handle
-== Feature Requests
+## Feature Requests
 * [Thorti] Unterschiedliche Configs für Tallycom (Kamera vs. Mischer/VOC-Office). Kamera= LED leuchtet, wenn Cam in Verwendung; Mixer/Office= LED leuchtet, wenn jemand im Channel spricht
@@ Line 23: / Line 23: @@
 * [Thorti] Beltbak-Lösung für mobil mit WLAN (Halterung mit Gürtelklammer?). Stromversorgung via Powerbank.
-== Hardware
+## Hardware
 The pi (3) can either use its build in wifi with the a wifi provided by the wrt or in case of congress could also use the WPA2-enterprise network.
 Alternative ethernet can be used
-=== tallypi
+### tallypi
 The current hardware is a Raspberry Pi 3, we need evaluate if the intercom part also works stable with an older pi.
@@ Line 35: / Line 35: @@
   * 1x LED + Resistor ~2€ (for voctolight)
-=== Headset and sound card
+### Headset and sound card
 as it has turned out, the logitech headsets are not suitable for live envirenments. Therefore we looked into other options
@@ Line 46: / Line 46: @@
 {{:projects:tally1.jpg?400|}}  {{:projects:tally2.jpg?200|}} {{:projects:tally4.jpg?200|}} {{:projects:tally3.jpg?200|}}
-==== prototype alpha
+#### prototype alpha
 {{:hardware:cwf7awkwiaejgfc.jpg?200|}}
-==== current inventory
+#### current inventory
   * [[projects:tallycom:bestand]]
-=== 5V from cam power supply for tallycom
+### 5V from cam power supply for tallycom
 {{:projects:psu-closed.jpg?400|}}  {{:projects:psu-open.jpg?400|}}  {{:projects:psu-cam.jpg?400|}}
@@ Line 60: / Line 60: @@
 This should work with most other cams to as long as you are not to close to 5V. \\
-== Tally software
+## Tally software
-=== voctolight (old version)
+### voctolight (old version)
 voctolight is a tellylight part of this project.
@@ Line 79: / Line 79: @@
   sudo systemctl restart voctolight.service
-=== tally (new version)
+### tally (new version)
 The new version of the tally software uses all three colors of the LED:
@@ Line 107: / Line 107: @@
 For more documentation, see https://github.com/rlutz/voctoknopf/blob/master/src/Tally.md
-== Intercom software
+## Intercom software
-=== voctocom
+### voctocom
 To get a audio connection between mixer and camera operator we run a command line mumble client on an rasperrypi 2/3 connected to an USB Headset. For small events, this client connects to a mumble server on the voctogui laptop (or the cube / minion); for bigger event to, a central one running in the server case.
@@ Line 121: / Line 121: @@
   * Visual Call: LCD / LED notification for mention / call
-==== Taliepi
+#### Taliepi
 c.f. https://github.com/dchote/talkiepi and https://github.com/dchote/talkiepi/tree/master/doc
@@ Line 132: / Line 132: @@
-===== Setup
+##### Setup
 see https://github.com/dchote/talkiepi/tree/master/doc
 You need to edit `/usr/share/alsa/alsa.conf` and change `defaults.ctl.card 1` and `defaults.pcm.card 1`
-==== barnard
+#### barnard
 This is based on a RasPi 3 and Raspian: