operation:framegrabbing

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision		 Previous revision
operation:framegrabbing [2017/04/03 17:08] – andioperation:framegrabbing [2026/07/26 22:17] (current) – external edit 127.0.0.1
Line 1: Line 1:
-= Ephiphan Broadcaster operation+# Ephiphan Broadcaster operation
  
-== Settings +## Settings
 The best working settings depended on hardware generation, see [[hardware:epiphan-broadcaster]] The best working settings depended on hardware generation, see [[hardware:epiphan-broadcaster]]
  
Line 8: Line 8:
  
  
-== Operational notes+## Operational notes
  
 Some projector setups require a custom resolution on the Broadcaster configuration to work properly.  Some projector setups require a custom resolution on the Broadcaster configuration to work properly. 
Line 35: Line 35:
 To make an adjustment, add a value to one or more fields and select Apply. To make an adjustment, add a value to one or more fields and select Apply.
 **To clear any adjustments, delete the value from one or more fields and select Apply. To have changes take effect, you must reboot the VGA Broadcaster Lite device.** You can make more than one change before selecting Apply and rebooting. **To clear any adjustments, delete the value from one or more fields and select Apply. To have changes take effect, you must reboot the VGA Broadcaster Lite device.** You can make more than one change before selecting Apply and rebooting.
-== Use of Broadcasters with DVSwitch+## Use of Broadcasters with DVSwitch
  
 Usually we use the MJPEG streaming function of the Broadcaster (why?), which can be accessed through http://10.73.x.2:1881/vgabroadcaster.mjpg on older generation models, and through http://10.73.x.2:1881/stream.mjpg on new gen models (called VGADVI Broadcaster). Usually we use the MJPEG streaming function of the Broadcaster (why?), which can be accessed through http://10.73.x.2:1881/vgabroadcaster.mjpg on older generation models, and through http://10.73.x.2:1881/stream.mjpg on new gen models (called VGADVI Broadcaster).
Line 62: Line 62:
 dvsource-file-voc -h "10.73.x.1" -i 5 -p 2000 /dev/stdin</code> dvsource-file-voc -h "10.73.x.1" -i 5 -p 2000 /dev/stdin</code>
  
-== Misc+## Misc
  
 The broadcasters are available via 192.168.255.250, no matter which IP is configured on the web interface. To reach it, set up your computer with IP address 192.168.255.249 using 255.255.255.252 as netmask. The broadcasters are available via 192.168.255.250, no matter which IP is configured on the web interface. To reach it, set up your computer with IP address 192.168.255.249 using 255.255.255.252 as netmask.
Line 72: Line 72:
 If you wish to replace the USB stick with a larger model, please make sure to ext-3-format the stick and move the files from the old stick. Do not use dd. If you wish to replace the USB stick with a larger model, please make sure to ext-3-format the stick and move the files from the old stick. Do not use dd.
  
-== hax0r 
- 
-broadcaster lite partition layout 
- 
-<code> 
-Disk /dev/sdc: 1967 MB, 1967128576 bytes 
-61 heads, 62 sectors/track, 1015 cylinders, total 3842048 sectors 
-Units = sectors of 1 * 512 = 512 bytes 
-Sector size (logical/physical): 512 bytes / 512 bytes 
-I/O size (minimum/optimal): 512 bytes / 512 bytes 
-Disk identifier: 0x00000000 
- 
-   Device Boot      Start         End      Blocks   Id  System 
-/dev/sdc1   *           1     1051395      525697+   b  W95 FAT32 
-/dev/sdc2   *     1051396     3838729     1393667   83  Linux 
-</code> 
  • operation/framegrabbing.1491239305.txt.gz
  • Last modified: 2017/04/03 17:08
  • by andi