Panasonic AG-AC 160 AEJ [c3voc]

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
= Panasonic AG-AC 160 AEJ

{{ :hardware:img_6802.png?400|}}
* {{ :hardware:16586-agac160brochure.pdf | datasheet}}
* Audio XLR input
  * XLR (3-pin) x 2 (AUDIO INPUT1, AUDIO INPUT2)
  * LINE/MIC selectable, high impedance 
    * LINE: 0 dBu (for more about dBu see [[https://de.wikipedia.org/wiki/Bezugspegel_(Tontechnik)#Internationale_Referenzwerte|1]] [[http://www.sengpielaudio.com/Rechner-db-volt.htm|2]] )
    * MIC: -40/-50/-60 dBu (menu selectable)
    * MIC POWER +48 V ON/OFF switchable


^  ^ Pegel in dBu ^ Spannung in Volt ^	
| Studiopegel ARD | +6 | 1,550 |
| Studiopegel USA | +4 | 1,228 |
| Normpegel 1 V  | +2,22 | 1 |
| Normpegel 0,775 V | 0 //Bezug// | 0,775 |
| Heimtechnik	 | −7,78 | 0,316 |
| | -40 | 0.00774 |
| | -50 | 0.00245 |
| | -60	| 0.00077 |

* out: HDMI (only in HD mode), SDI, DV (only in SD mode)
* resolutions: 
{{:hardware:cams:resolutions.png}}


==== Progressive mode

so we don't need to deinterlace manually using 1080 with HD-SDI

{{:hardware:ag-ac160a_operatinginstructions_advanced.pdf|Camera Manual Part 2}}, Page 23:

You can shoot in progressive mode when you select 25P for 1080 mode in AVCHD mode or 25P for 576 mode in DV mode in the //REC FORMAT// item on the setup menu //RECORDING SETUP// screen. [...]

**25P mode:**
Shoots 25 frames/second in the progressive mode.
For output and recording of video signal, the 25 frames/second image is converted to 50-field-per-second interlace signal [for SDI output]. This mode gives high quality video.

{{:hardware:cams:progressive-mode.png}}


==== Audio

Settings:
{{https://c3voc.de/gallery/2014/ep14/IMG_5868.JPG}}


 Limiter

The limiter is a compressor with a threshold off 0db or a little below 0 an 0ms attack and 1:∞ compression.
The limiter is disabled when the the pegel switch is set to "AUTO"