Differences

This shows you the differences between two versions of the page.

--- erfavoc [2020/10/29 09:57] – [Framegrabber / Capture Cards] derpeter
+++ erfavoc [2026/07/26 21:08] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
-= Erfa / (Hack)space Video Setup
+# Erfa / (Hack)space Video Setup
-Live-Streaming and recording setups in CCC Erfas and Hackerspaces. \\
-Recordings of these groups can be found on [[https://media.ccc.de/b/erfas]]
-== Existing setups in local CCC Erfas
+Live-Streaming and recording setups in CCC Erfas and Hackerspaces.
-  * [[erfa:cccac | CCCAC]]
+Recordings of these groups can be found on
-  * [[erfa:cccb | CCCB]]
+<https://media.ccc.de/b/erfas>
-  * [[erfa:c4 | CCC Köln]]
-  * [[erfa:muc | CCC München]]
-  * [[https://scratchbook.ch/2019/01/vortragsaufzeichnung-und-videostreaming-im-eigenbau/|CCC Zürich]]
-  * [[https://wiki.verschwoerhaus.de/voc | Verschwörhaus Ulm]]
-= Ideas for your own Setup
+## Existing setups in local CCC Erfas
-== Design Goals
+- [ CCCAC](erfa:cccac )
-A hard- and software collection that can be used entirely or in peaces for small to midsize events in hacker-spaces / erfas. \\
+- [ CCCB](erfa:cccb )
-It should be aligned with the best practices worked out in the operation of c3voc but be a more cost efficient solution. \\
+- [ CCCH - Leitstelle511 (WIP)](erfa:c3h )
-We will list here only components we tested / use our self. This doesn't mean you can't use other components, its just an blueprint. \\
+- [ CCC Köln](erfa:c4 )
-It also should be modular that it can be tailored to the needs and budgets of user and already existing components can be integrated. \\
+- [ CCC München](erfa:muc )
+- [CCC Zürich](https://scratchbook.ch/2019/01/vortragsaufzeichnung-und-videostreaming-im-eigenbau/)
+- [ Verschwörhaus Ulm](https://wiki.verschwoerhaus.de/voc )
-In the following we list the main building blocks an make some suggestions what could be used.
+# Ideas for your own Setup
-*  FullHD Video recording
-  *  live mxing => [[:voctomix]]
-  *  Streaming in FullHD  => [[erfavoc#streaming]]
-  *  Slides via "Framegrabber"  => [[erfavoc#framegrabber]]
-  *  At least one Kamera => [[erfavoc#camera]]
-* Capture Audio => [[erfavoc#audio]]
-  *  Headset + hand mic
-  *  Audio mixer (optional)
-*  Postprocessing support to publishing on media.ccc.de and optional other platforms => [[erfavoc#publishing]]
-  * without fuse recording  => tracker import recording worker
-  * with full tracker stack  => normal tracker chain
-[[ erfavoc-old | old page (ger) ]]
+## Design Goals
-== Camera
+A hard- and software collection that can be used entirely or in peaces
-There are numerous options for cameras depending on your budget. In most situations we recommend to feed you audio into the camera via XLR. This has two main advantages, one it that you audio will be in sync with the video all the time,
+for small to midsize events in hacker-spaces / erfas.
-the other is that you have a backup of audio and video on the SD card of your cam. Also using SDI to connect the camera to your video mixer is a much more stable and reliable solution than e.g. HDMI. Therefore the following points should be taken into concern when buying a cam.
+It should be aligned with the best practices worked out in the operation
-  * Audio in (preferable XLR)
+of c3voc but be a more cost efficient solution.
-  * Video out (preferable SDI)
+We will list here only components we tested / use our self. This doesn't
-  * SD card recording (much cheaper than other solutions)
+mean you can't use other components, its just an blueprint.
-  * A wide-aperture lens (if you don't have a professional light setup)
+It also should be modular that it can be tailored to the needs and
+budgets of user and already existing components can be integrated.
-In most cases this will lead you to semi- / professional cameras which can be expensive. It may be a good option to look for used ones. A entrance level cam is the [[hardware:hm-200e]] which sadly has not the best lens but has a reasonable price.
+In the following we list the main building blocks an make some
-A much better lens can be found in many Panasonic cams like [[hardware:ag-ac-160-eej]] which you probably can buy second hand.
+suggestions what could be used.
-A list of cameras which are also suitable to some extend can be found in our [[distributed-conference]] page.
+- FullHD Video recording
+- live mxing =\> [:voctomix](:voctomix)
+- Streaming in FullHD =\> [erfavoc#streaming](erfavoc#streaming)
+- Slides via "Framegrabber" =\>
+  [erfavoc#framegrabber](erfavoc#framegrabber)
+- At least one Kamera =\> [erfavoc#camera](erfavoc#camera)
+- Capture Audio =\> [erfavoc#audio](erfavoc#audio)
+- Headset + hand mic
+- Audio mixer (optional)
+- Postprocessing support to publishing on media.ccc.de and optional
+  other platforms =\> [erfavoc#publishing](erfavoc#publishing)
+- without fuse recording =\> tracker import recording worker
+- with full tracker stack =\> normal tracker chain
-== Audio
+[ old page (ger) ]( erfavoc-old )
-In most situations a headset results in the best audio quality, especially with untrained speakers. As the speaker don't alternates the distance between mic and mouth this also makes it easier for the audio mixer operator.
-In our experience most speakers prefer a headset because it keeps there hands free.
-For question from the audience and moderation purposes a hand mic is a useful addition to the headset.
+## Camera
-Depending on the budget a audio mixer is a useful addition to the setup. Especially if audio from the presenter laptop should be included.
+There are numerous options for cameras depending on your budget. In most
-If a camera without audio input is used, a mixer with build-in sound card can be very useful. Our recommendation is to feed the output of the mixer (or of the two mic's) into the camera, preferable via XLR).
+situations we recommend to feed you audio into the camera via XLR. This
+has two main advantages, one it that you audio will be in sync with the
+video all the time, the other is that you have a backup of audio and
+video on the SD card of your cam. Also using SDI to connect the camera
+to your video mixer is a much more stable and reliable solution than
+e.g. HDMI. Therefore the following points should be taken into concern
+when buying a cam.
-If it is in the budget, digital mixers can be a good addition to the setups. For references what is used by us have a look at [[hardware:audiocase]].
+- Audio in (preferable XLR)
+- Video out (preferable SDI)
+- SD card recording (much cheaper than other solutions)
+- A wide-aperture lens (if you don't have a professional light setup)
-== Encoding / Recording / Mixing
+In most cases this will lead you to semi- / professional cameras which
-A machine that is capable of running a software video mixer, encode the results for recording and streaming and that has capture devices is the central point of the setup.
+can be expensive. It may be a good option to look for used ones. A
-In our setup we run voctomix on it, Open Broadcast Studio (OBS) is another alternative. We recommend to run Linux here but if you into pain windows could work for to with obs.
+entrance level cam is the [hardware:hm-200e](hardware:hm-200e) which
+sadly has not the best lens but has a reasonable price. A much better
+lens can be found in many Panasonic cams like
+[hardware:ag-ac-160-eej](hardware:ag-ac-160-eej) which you probably can
+buy second hand.
-== Framegrabber / Capture Cards
+A list of cameras which are also suitable to some extend can be found in
-Capture cards can be either PCIe based or USB 2/3 depending on budget and use case. We use mostly blackmagic decklink [[hardware:decklink]].
+our [distributed-conference](distributed-conference) page.
-A (probably not complete) list of alternatives can be found here [[hardware:framegrabber]] . Grabbing the camera input is usualy straid forward,
-capturing slides from speaker notebooks can be quite challenging. E.g. Apple Computer tend to believe the presentation belongs to Apple so they encrypt the output, also you will run
-into hackers with there hand tailored graphic stack which output 1337x42 and you need to somehow scale that. Here are devices that can do scalling, or grabber cards that are agnostic regarding the input
-a good option.
-== Streaming
+## Audio
-VOC CDN can be used by all erfas/friends just ask us :-) \\
-we can either pull a "voc default mkv" from an icecast running at your side or offer an RTMP endpoint.
+In most situations a headset results in the best audio quality,
-Both ways the stream will end up in our cdn and you can use our [[software:streamingwebsite]] as a front-end.
+especially with untrained speakers. As the speaker don't alternates the
-The preferred way is to just send us an pull request with your configuration.
+distance between mic and mouth this also makes it easier for the audio
-This also also you to embed the stream in your own webpage.
+mixer operator. In our experience most speakers prefer a headset because
+it keeps there hands free.
+For question from the audience and moderation purposes a hand mic is a
+useful addition to the headset.
+Depending on the budget a audio mixer is a useful addition to the setup.
+Especially if audio from the presenter laptop should be included. If a
+camera without audio input is used, a mixer with build-in sound card can
+be very useful. Our recommendation is to feed the output of the mixer
+(or of the two mic's) into the camera, preferable via XLR).
+If it is in the budget, digital mixers can be a good addition to the
+setups. For references what is used by us have a look at
+[hardware:audiocase](hardware:audiocase).
+## Encoding / Recording / Mixing
+A machine that is capable of running a software video mixer, encode the
+results for recording and streaming and that has capture devices is the
+central point of the setup. In our setup we run voctomix on it, Open
+Broadcast Studio (OBS) is another alternative. We recommend to run Linux
+here but if you into pain windows could work for to with obs.
+## Framegrabber / Capture Cards
+Capture cards can be either PCIe based or USB 2/3 depending on budget
+and use case. We use mostly blackmagic decklink
+[hardware:decklink](hardware:decklink). A (probably not complete) list
+of alternatives can be found here
+[hardware:framegrabber](hardware:framegrabber) . Grabbing the camera
+input is usualy straid forward, capturing slides from speaker notebooks
+can be quite challenging. E.g. Apple Computer tend to believe the
+presentation belongs to Apple so they encrypt the output, also you will
+run into hackers with there hand tailored graphic stack which output
+x42 and you need to somehow scale that. Here are devices that can do
+scalling, or grabber cards that are agnostic regarding the input a good
+option.
+## Streaming
+VOC CDN can be used by all erfas/friends just ask us :-)
+we can either pull a "voc default mkv" from an icecast running at your
+side or offer an RTMP endpoint. Both ways the stream will end up in our
+cdn and you can use our
+[software:streamingwebsite](software:streamingwebsite) as a front-end.
+The preferred way is to just send us an pull request with your
+configuration. This also also you to embed the stream in your own
+webpage.
+## Publishing
+Depending on how much of our stack you use we have different option on
+ingesting you content in our publishing pipeline. The
+[:c3tracker](:c3tracker) can support you from cutting the raw videos to
+publish numerous formats to voctoweb (the software behind
+[:media.ccc.de](:media.ccc.de)) and other platforms like youtube. We can
+ingest ready produced videos with pre and postrole or let the tracker
+add those to the file.
-== Publishing
-Depending on how much of our stack you use we have different option on ingesting you content in our publishing pipeline.
-The [[:c3tracker]] can support you from cutting the raw videos to publish numerous formats to voctoweb (the software behind [[:media.ccc.de]]) and other platforms like youtube.
-We can ingest ready produced videos with pre and postrole or let the tracker add those to the file.