This page aims on documenting some real world setup used by groups / individuals around the world
The c3voc is currently running voctomix on our 6 Encoder PCs the voctogui runs on our Mixer laptops.
Currently we use the decklink cards in combination with a Tronsmart Pavo M9 as slide grabber and
have to types of Cameras and tripods which we connect via SDI to decklink cards.
In the past we used Epiphan Broadcaster via IP as slide grabber but we where unhappy with delay and compatibility of these devices.
We feed Audio via XLR right to the camera which embedds it into the SDI signal. We have four Audio case which we use if the venue is no
providing a better audio system.
The CCC Cologne uses a setup very similar to the C3VOC. Voctocore runs on a Encoder PC, while the voctogui is running on a club member's laptop. We connect the Encoder PC to a Panasonic AG-AC 160 AEJ mounted on a Sachtler ACE M MS, as well as a Zidoo X9 used as a cheap video scaler. The camera gets its audio signal from a separate audio case.
The audio case consists of three wireless receivers feeding into a mixer that is subsequently fed into the camera, and (if necessary) the PA. The receivers are paired with one handheld transmitter, and two body packs connected to lavalier clip-on microphones. To power the receivers and provide them with signal, while only using one pair of antennas, we use a antenna splitter.
The CCC Berlin setup is currently an experimental setup. We currently run there an JVC HM300 cammera which has IP based streaming build in which we feed to voctomix. We also have there a tronsmart grabber box which also can stream to voctocore. There are still some sync issues with this setup.
The Audio setup for CCCB can be found here
This is probably the cheapest vocto setup you can find. All the sources run on separate devices (!) and are encoded into a single stream by our server.
On the server I host voctocore I run the following scripts
