Differences

This shows you the differences between two versions of the page.

--- software:voctomix-hardware-examples [2017/07/14 10:58] – derpeter
+++ software:voctomix-hardware-examples [2017/07/14 14:10] – [Misc] david
@@ Line 14: / Line 14: @@
 == CCC Cologne
+The CCC Cologne uses a setup very similar to the [[software:voctomix-hardware-examples#c3voc|C3VOC]]. Voctocore runs on a Encoder PC, while the voctogui is running on a club member's laptop.
+We connect the Encoder PC to a [[hardware:ag-ac-160-eej|Panasonic AG-AC 160 AEJ]] mounted on a Sachtler ACE M MS, as well as a [[hardware:zido_x8_x9|Zidoo X9]] used as a cheap video scaler.
+The camera gets its audio signal from a separate audio case.
+=== Encoder PC
+* Intel Core i7 6700K
+* 16 GB RAM
+* 2  Blackmagic Design DeckLink Mini Recorder (one for SDI to the camera, one for HDMI to the Zidoo and subsequently the speaker laptop)
+=== Audio Case
+The audio case consists of three wireless receivers feeding into a mixer that is subsequently fed into the camera, and (if necessary) the PA.
+The receivers are paired with one handheld transmitter, and two body packs connected to lavalier clip-on microphones.
+To power the receivers and provide them with signal, while only using one pair of antennas, we use a antenna splitter.
+* Mixer: Mackie 1202 VLZ4
+* Receivers: 3 Sennheiser EM 100 G3 1G8
+* Splitter: Sennheiser ASA 1 1.8GHz
+* Handheld transmitter: SKM 100-835 G3 1G8
+* Body packs: 2 SK 100 G3 1G8
+* Lavalier Clip-ons: 2 Sennheiser MKE2-EW Gold
 == CCC Berlin
@@ Line 21: / Line 40: @@
 The Audio setup for CCCB can be found [[:chaosradio | here]]
+== David's setup
+This is probably the cheapest vocto setup you can find. All the sources run on separate devices (!) and are encoded into a single stream by our server.
+=== Sources
+* Camera 1: Raspberry Pi with camera.
+* Camera 2: Raspberry Pi with camera.
+* Slides: Lenkeng LVK373a (see: [[https://blog.danman.eu/new-version-of-lenkeng-hdmi-over-ip-extender-lkv373a/|reverse engineering]])
+* Audio: Odroid U2 connected via USB to our audio mixer
+=== Hardware
+* Audio mixer: Behringer Xenyx Q502usb
+* Microphones: (2x) Skp Uhf271
+* Grabber: Lenkeng LVK373a
+* Server: i7 4790 + Gigabyte motherboard + 8GB Ram
+=== Misc
+* We have our custom slides software, so the Camera1 doubles as a presenter for slides, which is why it is hooked to an active hdmi splitter, and the splitter is connected to both the projector and the grabber.
+* With our custom slides software, we have a dumb android app on a tablet that lets the speaker draw over the slides.
+* The camera 1 is fixed and has 2 cheap [[http://www.conrad.com/medias/global/ce/2000_2999/2000/2090/2090/209089_LB_00_FB.EPS_1000.jpg|servos]] to make it move.
+* The camera 2 is on a tripod powered via PoE.