Differences

This shows you the differences between two versions of the page.

--- hardware:ag-ac-160-eej [2020/04/27 12:12] – derpeter
+++ hardware:ag-ac-160-aej [2023/10/25 02:28] – removed - external edit (Unknown date) 127.0.0.1
@@ Line 1: / Line 1: @@
-= Cameras: Panasonic AG-AC 160 AEJ
-{{ :hardware:img_6802.png?400|}}
-* {{ :hardware:16586-agac160brochure.pdf | datasheet}}
-* Audio XLR input
-  * XLR (3-pin) x 2 (AUDIO INPUT1, AUDIO INPUT2)
-  * LINE/MIC selectable, high impedance
-    * LINE: 0 dBu (for more about dBu see [[https://de.wikipedia.org/wiki/Bezugspegel_(Tontechnik)#Internationale_Referenzwerte|1]] [[http://www.sengpielaudio.com/Rechner-db-volt.htm|2]] )
-    * MIC: -40/-50/-60 dBu (menu selectable)
-    * MIC POWER +48 V ON/OFF switchable
-^  ^ Pegel in dBu ^ Spannung in Volt ^
-| Studiopegel ARD | +6 | 1,550 |
-| Studiopegel USA | +4 | 1,228 |
-| Normpegel 1 V  | +2,22 | 1 |
-| Normpegel 0,775 V | 0 //Bezug// | 0,775 |
-| Heimtechnik	 | −7,78 | 0,316 |
-| | -40 | 0.00774 |
-| | -50 | 0.00245 |
-| | -60	| 0.00077 |
-* out: HDMI (only in HD mode), SDI, DV (only in SD mode)
-* resolutions:
-{{:hardware:cams:resolutions.png}}
-==== Progressive mode
-so we don't need to deinterlace manually using 1080 with HD-SDI
-{{:hardware:ag-ac160a_operatinginstructions_advanced.pdf|Camera Manual Part 2}}, Page 23:
-You can shoot in progressive mode when you select 25P for 1080 mode in AVCHD mode or 25P for 576 mode in DV mode in the //REC FORMAT// item on the setup menu //RECORDING SETUP// screen. [...]
-**25P mode:**
-Shoots 25 frames/second in the progressive mode.
-For output and recording of video signal, the 25 frames/second image is converted to 50-field-per-second interlace signal [for SDI output]. This mode gives high quality video.
-{{:hardware:cams:progressive-mode.png}}
-==== Audio
-Settings:
-{{https://c3voc.de/gallery/2014/ep14/IMG_5868.JPG}}
- Limiter
-The limiter is a compressor with a threshold off 0db or a little below 0 an 0ms attack and 1:∞ compression.
-The limiter is disabled when the the pegel switch is set to "AUTO"